Lintzaag MT-SP 3010x20x0.9 t=10/14
The fabrication professional for light and medium wall thicknesses.
Engineered for:
- Structurals with light or medium walls
- Short chipping materials.
- Sheet metal on vertical band saw machines
Product specification
| Type | M42 MT-SP |
| Length | 2035 mm |
| Width of blade | 20 mm |
| Thickness of saw blade: | 0.9 mm |
| Tooth pitch | 10/14 |
| tooth angle | 0 degrees |
Very good qualification for
| Structural steel | <70 mm |
| Case-hardening steels | <70 mm |
| Free machining steels | <70 mm |
| Unalloyed tool steels | <70 mm |
| Spring steels | <70 mm |
| >Ball bearing steel | <70 mm |
| High speed steels | <70 mm |
| Cold work steel | <70 mm |
| Nitride steels | <70 mm |
| Heat treatable steels | <70 mm |
| Hot working steels | <70 mm |
| Stainless steels | <70 mm |
| Steel casting | <70 mm |
| Cast irons | <70 mm |
| Brass | <70 mm |
| Bronze | <70 mm |
| Red brass | <70 mm |
Good qualification for
| Heat resistant steels | <70 mm |
| High temperature steels | <70 mm |
| High tensile steels | <70 mm |
| Titanium-titanium alloys | <70 mm |
| Nickel alloys | <70 mm |
| Aluminium + alloys | <70 mm |
| Aluminium alloys with silicon | <70 mm |
Suitble for these machines
| BRM Bright Machinery | BM20411 |
| GÜDE | MBS 125 V |
| HOLZMANN | BS 125 M |
Op voorraad
SKU
VVO0808
€ 35,75
| Type: | M42 MT-SP |
| Length: | 2035 mm |
| Width of blade: | 20 mm |
| Thickness of saw blade: | 0.9 mm |
| Tooth pitch: | 10/14 |
Very good qualification for:
Structural steels, Case-hardening steels, Free machining steels, Unalloyed tool steels, Spring steels, Roller bearing steel, High speed steels, Cold work steel, Nitride steels, Heat treatable steels, Hot working steels, Stainless steels, Steel castings, Cast irons, Aluminium, Copper, Brass, Bronze, Red brass
