Lintzaag MT-FT 3350x27x0.9 t=5/7

Allround Lintzaag voor vrijwel alle materiaalsoorten van dun tot middelgroot formaat.

Ontworpen voor:

  • Dun tot middelgroot wanddikte.
  • Fijn verspannend.
  • Geschikt voor plaatmateriaal

Productspecificatie

Type: M42 MT-SP
Lengte: 3350 mm
Hoogte: 20 mm
Dikte: 0.9 mm
Tandsteek per inch: 5/7

Toepassing: Constructiestaal, Gehardstaal, Ongelegeerd gereedschapsstaal, Verenstaal, Lagerstaal, Sneldraadstaal, Koudwerkstaal, Roestvast staal

Op voorraad
SKU
FT3350270957
€ 45,90
Type: M42 MT-SP
Lengte: 3350 mm
Hoogte: 20 mm
Dikte: 0.9 mm
Tandsteek per inch: 5/7

Toepassing: Constructiestaal, Gehardstaal, Ongelegeerd gereedschapsstaal, Verenstaal, Lagerstaal, Sneldraadstaal, Koudwerkstaal, Roestvast staal

Meer informatie
Merk IMET
Maak hieronder uw keuze Extra advies
Lengte 3350
Hoogte 27 mm
Dikte 0.9 mm
Tandsteek per inch 5/7Tpi
Materiaal Constructiestaal, Gehard staal, Ongeleerd staal, Verenstaal, Lagerstaal, Sneldraaistaal, Koud bewerkbaar staal, Nitreerstaal, Gecoat staal, Warm bewerkbaar staal, Roestvast staal, Gietijzer, Gietstaal, Koper, Messing, Brons, Roodkoper
Type M42 MT-FT
Vorm massief 50 < 70mm
Vorm profiel diameter 80 mm, 100 mm, 120 mm, 150 mm
Vorm profiel wanddikte 10 mm
Vorm profiel wanddikte 8 mm, 10 mm, 15 mm, 20 mm, 30 mm
Vorm profiel wanddikte 8 mm, 10 mm, 15 mm, 20 mm, 30 mm
Vorm profiel wanddikte 6 mm, 8 mm, 10 mm, 15 mm, 20 mm
Machine merk Onbekend
Machine type Onbekend
Description
Type: M42 MT-SP
Lengte: 3350 mm
Hoogte: 20 mm
Dikte: 0.9 mm
Tandsteek per inch: 5/7

Toepassing: Constructiestaal, Gehardstaal, Ongelegeerd gereedschapsstaal, Verenstaal, Lagerstaal, Sneldraadstaal, Koudwerkstaal, Roestvast staal